PL Series™ - MES Power Lock Kits
  |
PLI
- C, D Includes clear cover. Use on double wall constructed door. When ordering specify lock (C) 2.650" Sliding Bolt, or (D) Rivet Style Lock. Reverse is shown with HDC's MES pistol red actuator which utilizes a patented detent feature holding lock orientation while vehicle is in motion. Fire/Rescue/Service Vehicles |
|---|---|
PLI
Schematic |
Lock
Identification |
|
PL
Configurations |
|
|
MES Specifications |
 |
PLII Retrofits and replaces all .750" to 1.000" cam locks. Kit includes replacement lock, wire linkage and clear cover. Typically used on double wall constructed doors. Reverse is shown with HDC's MES pistol red actuator which utilizes a patented detent feature holding lock orientation while vehicle is in motion. Fire/Rescue/Service Vehicles |
|---|---|
|
PLII Schematic |
Lock
Identification |
|
PL
Configurations |
|
|
MES Specifications |
|
|
PLII
- S, SA Retrofits many latches that use a .750" cam lock. PLII-S is sold without a mounting base and PLII-SA is sold with a mounting base. Both designed to allow the original O.E.M. lock to remain as the key override in paddle latches. Reverse is shown with HDC's MES pistol black actuactor which utilizes a patented lock principle. The actuator's unique nose is the locking wedge. Fire/Rescue/Service Vehicles |
|---|---|
|
PLII - S, SA Schematic |
Lock
Identification |
|
PL
Configurations |
|
|
MES Specifications |
|
 |
PLIV
- A, B, C Lock I.D. (A)
2.000" Sliding Bolt, (B) 2.250" Sliding Bolt, (C) 2.650"
Sliding Bolt Actuator is loose allowing flexibility in its installation.
Used with both single & double wall doors. Optional adhesive
mounting base PL801 available. Reverse is shown with HDC's MES pistol red actuator which utilizes a patented detent feature holding lock orientaiton while vehicle is in motion. Ambulance/Motor Coach/Rescue/Service |
|---|---|
|
PLIV Schematic |
Lock
Identification |
|
PL
Configurations |
|
|
MES Specifications |
|
 |
PLV,
PLVe Retrofits and replaces all .750" to 1.000"
cam locks. Actuator is loose allowing flexibility in its installation.
Kit Includes replacement lock and wire linkage. Typically used
on double wall constructed doors.
Reverse is shown with HDC's MES pistol red actuator which utilizes a patented detent feature holding lock orientaiton while vehicle is in motion. Fire/Rescue/Service Vehicles |
|---|---|
|
PLV Schematic |
Lock
Identification |
|
PL
Configurations |
|
|
MES Specifications |
|
 |
PLVII Dead bolt lock used for roll-up doors, van
cargo doors, cargo compartment doors and armored vehicles.
This lock is ideal for positive dead bolt sliding lock on
non-personnel doors (not provided with any external override).
Universal dead bolt locking used only where alternate access is available. |
|---|---|
|
PLVII Schematic |
|
|
PL
Configurations |
|
|
MES Specifications |
|
 |
ACT-R Spring Detent Actuators, two wire MES
actuators (Red Actuator).
|
|---|---|
|
MES Specifications |
|
 |
ACT-B Direct Drive, two wire MES actuators (Black
Actuator).
|
|---|---|
|
MES Specifications |
|
 |
MESFRA,
MESFRA-5 Clutch Drive Actuators. Five wire MES
Swiss made actuator. Friction reduced for ease of use
during key over-ride. Can be used with any power lock
capable hardware.
|
|---|---|
|
MES Specifications |
|
 |
J236 Replacement lock, 5/8” long barrel
J236 lock with lazy action cam lock works with spring
detent type actuators (Red Actuator). Includes nylon
rod connector and linkage.
|
|---|---|
|
Lock Identification |
|
 |
PL801 Adhesive Mounting Base used with our
PLIII’s and PLV’s. The dimensions are
2.0" x 4.0". Includes nylon locking nuts.
|
|---|---|
|
Quote or Contact Us |
|
 |
C1 Clear Cover intended use for MES
actuators.
|
|---|---|
|
Quote or Contact Us |
|